$11/KG...Sort Of.
You can purchase a 3KG spool of Black PLA for $33+$5 of fixed shipping. This is $12.66 per KG. Down from the $15 that we were at before....
top of page
Tangled
Nov 121 min read
We Have Some Blue Glut PETG
We have some filament that was left over from a production job two weeks ago. And thought that you would all enjoy it. As many of you...
Tangled
Sep 162 min read
No More Tangled After End of September...Until January
To be honest we might be lying, it is possible in October we will have time to do another run. But we are not planning on it, currently....
Tangled
Sep 42 min read
There's Lots of 3D Printer Filament Cheaper Than Us. Here's why we don't care
So we were scrolling instagram today and saw this add. Looks like a good deal you should get some while it lasts. They are selling...
Tangled
Aug 271 min read
Back in Black, Spool on the Rack
Black is back in stock. But there is a Catch. They are shipping with Re-used Spools Only! Our spool supplier had their injection mold...
Tangled
Aug 151 min read
We Done Screwed Up Again
Hey All, So as a good company we should probably keep this quiet. But, we are idiots, and there is no way that Tangled will continue to...
Tangled
Aug 91 min read
Testing Carbon Fiber Filament
Hey Guys, So Tangled Testing is ramping. We got a basic set of tests done with carbon fiber. For these first tests we are focusing on...
Tangled
Aug 21 min read
We Did Science on Tangled Filament
So, many of you are like aware of the Tangled Testing Youtube Channel. This channel is the outlet for a bunch of testing that we will be...
Tangled
Jul 301 min read
Raise your Temp and/or Slow your Speed - How to Print PLA
Tangled PLA should be printed at: 200-235C if printing at 35-50mm/s (Old Prusa or Creality) 235-255C if printing at ~100mm/s (BambuLab...
Tangled
Jul 191 min read
We Done Did Gray PLA
Alright. This is V0.7 Light Gray. Gray As in Ash. As in Gray Beard, As in Not Gunmetal. V0.7 as in it might change. The color that is....
Tangled
Jul 91 min read
We Made an Ad
But Hopefully it is a good Ad. Look. At Slant 3D we have to make 3 videos a week about something. And we can talk about the magic of 3D...
Tangled
Jul 81 min read
We Got Wonk
That kind of says it all. We have some wonk filament from a recent color transition that we ran. Perfectly good filament, you just might...
Tangled
Jul 32 min read
We Do Not Make "PLA+." And Never Will
PLA+ is BS. It means something different to every company. Therefore it means nothing at all. PLA+ was originally meant to refer to Ingeo...
Tangled
Jun 282 min read
A "Meh" Review
We get a lot of feedback. And we do actually pay attention to it. Good and Bad. For example So what are we gonna do about this? We say...
Tangled
Jun 251 min read
Coupons are Stupid - We Put Toys in Instead
We do not put coupons in the box and we do not have sales. Both of those imply that the price of the item is not actually the price. We...
Tangled
May 271 min read
Memorial Day
Hey All, Here in the United States, today we remember all the people that have died fighting for our country. People who had such...
Tangled
May 232 min read
Second Dumbest Thing We Can Do - No More Subscriptions
Hey Everyone, As usual, thank you so much for the support for this project. The launch of the $15 filament went well. We hit our targets...
Tangled
May 191 min read
Spool Holder for 3 KG Spools
A few folks have asked for this so we thought we would just dredge this back up for you. This spool holder can be mounted on the wall or...
Tangled
May 192 min read
A Note About the Stuff
Hey All, First of all, thank you all so much. There has been a great response to the 15$ filament release. It looks like it will meet...
Tangled
May 63 min read
Phase...Whatever. We Hit $15 3D Printer Filament
Alright. We did it. We have released basic PLA at $15 per KG with free shipping. If you want to buy it push the "Shop" Button in the...
bottom of page